3D Real Color Al Dental Scanning Image System 3D Intraoral Oral Dental trolly for intraoral scanner

Dental X-ray machine is an X-ray imaging device used in the dental field to capture X-ray images of the oral cavity and teeth. It is widely used in dental diagnosis, treatment planning, and monitoring the progression of dental and oral diseases.

Product Advantage:

• 1. Increased Accuracy: Dental scanners provide highly precise images, reducing the chances of errors in diagnosis and treatment.

• 2. Patient Comfort: Compared to traditional impression methods, dental scanners are often more comfortable for patients, as they eliminate the need for messy impression materials.

• 3. Time Efficiency: Scanning takes less time than traditional methods, leading to faster turnaround for creating dental restorations.

• 4. Enhanced Collaboration: Digital scans can be easily shared with dental laboratories and specialists, improving communication and collaboration.

• 5. Environmental Benefits: Reduces the use of materials that could harm the environment, such as alginate and gypsum.

Product Uses:

• 1. Crown and Bridge Fabrication: Scanners are used to create accurate models for designing crowns and bridges.

• 2. Orthodontics: They help in developing custom aligners and retainers by providing precise measurements of the teeth.

• 3. Implant Planning: Scanning aids in the precise placement of dental implants by creating a 3D map of the jaw.

• 4. Virtual Treatment Planning: Dentists can simulate treatment outcomes and visualize potential results for better patient communication.

• 5. Periodontal Assessment: Scanners assist in evaluating gum health by providing detailed views of the periodontal structures.

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

• Turn on the power switch

• Check whether the air pressure is sufficient (must reach 0.6Mpa)

• Click the host to start, and check whether each action is working properly

• Check and clean up each box room

• Put the bag, load the material, put the material box

• Click the host to start

• The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)

• During the production process, check the product sealing and pumping conditions continuously

• Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean

• The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand