3D Digital Portable B-Ultrasound for Medical A023H-N

The wireless probe is a medical device typically used for medical ultrasound imaging. Unlike traditional wired probes, the wireless probe connects to ultrasound devices using wireless technology, eliminating the need for traditional connecting cables.

Product Advantage：

• Portability: Wireless probes are typically more lightweight and portable compared to traditional wired probes because they do not require complex cables and wiring, allowing medical staff to carry and operate them more conveniently.

• Flexibility: Since wireless probes are not constrained by connecting cables, doctors can adjust the position and angle of the probe more freely, making it easier to obtain the desired imaging angles and views.

• Reduced infection risk: Wireless probes do not require the frequent cleaning and disinfection needed for traditional probes because they lack connecting wires, reducing the risk of cross-infection.
  

• Remote imaging: Since wireless probes connect wirelessly, they can be used with devices that support remote imaging, such as smartphones, tablets, etc., allowing doctors to conduct ultrasound examinations and diagnoses remotely.
  

• Charging function: Most wireless probes have built-in rechargeable batteries, which can be charged via USB ports or other charging devices, providing longer usage time and a more convenient charging method.
  

• Wide application: Wireless probes can be used in various medical fields, including emergency medicine, internal medicine, pediatrics, obstetrics, etc., for ultrasound examinations and diagnoses.
  

Product Uses：

Medical laboratories, hospitals, clinics, and research institutions for assessing the blood condition of patients.

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

• Turn on the power switch

• Check whether the air pressure is sufficient (must reach 0.6Mpa)
  

• Click the host to start, and check whether each action is working properly
  

• Check and clean up each box room
  

• Put the bag, load the material, put the material box
  

• Click the host to start
  

• The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
  

• During the production process, check the product sealing and pumping conditions continuously
  

• Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
  

• The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand