High Performance Dental X Ray Machine D072D

The intraoral scanner is a digital imaging device used in the field of dentistry, typically employed to capture high-definition images and three-dimensional models of intraoral structures. These scanners assist dentists and dental specialists in diagnosis, treatment planning, and fabrication of dental restorations (such as crowns, aligners, etc.).

Product Advantage:

The primary advantages of intraoral scanners include reducing the need for traditional impressions, enhancing patient comfort; providing more accurate intraoral structure information, facilitating the fabrication of precise dental restorations; shortening treatment cycles, improving treatment efficiency; and enabling digital treatment planning, thereby enhancing the level of dental care.

Product Uses:

Digital Impressions;

Dental Diagnosis and Treatment Planning;

Aesthetic Reconstruction and Implant Surgery;

Digital Medical Record Management.

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

• Turn on the power switch

• Check whether the air pressure is sufficient (must reach 0.6Mpa)

• Click the host to start, and check whether each action is working properly

• Check and clean up each box room

• Put the bag, load the material, put the material box

• Click the host to start

• The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)

• During the production process, check the product sealing and pumping conditions continuously

• Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean

• The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand