You are here: Home » Product Category » Patient Monitor » Patient Monitor » MAYA-W003 Veterinary Multiparameter Patient Monitor Hospital Clinic Equipment for Pet Medical Care Vet Instrument

MAYA-W003 Veterinary Multiparameter Patient Monitor Hospital Clinic Equipment for Pet Medical Care Vet Instrument

Share to:

MAYA-W003 Veterinary Multiparameter Patient Monitor Hospital Clinic Equipment for Pet Medical Care Vet Instrument

Features:
■ 8.4″ color TFT display
■ Suitable for adult, pediatric and neonatal patient
■ Basic parameters (ECG, SpO2, NIBP) in a durable case for bedside monitoring and transport
■ Audible and visual alarms with adjustable alarm ranges
■ Networkable with CONTEC central monitoring system
■ Powerful data management and storage capacity
ECG
■ Lead type:5-lead
■ Input: RA; LA; RL; LL; V
■ Sweep speed: 12.5mm/s, 25mm/s, 50mm/s
■ Accuracy: ±1bpm or ±1%, whichever is greater
■ Protection: Withstand 4000VAC/50Hz voltage in isolation against electrosurgical and defibrillation
■ S-T detection: YES, Arrhythmia analysis: YES
■ Alarm: YES, audible and visual alarm, alarm events recallable
NIBP
■ Method: Oscillometry
■ Operation modes: Manual/Automatic/STAT
■ Measurement unit: mmHg/KPa selectable
■ Measurement types: Systolic, Diastolic, Mean
■ Over-pressure protection: YES
SpO2
■ Measurement range: 0-100%
■ Accuracy: ±2digit (70~100%);
■ 0~69% unspecified
Standard Configuration:
◇ ECG, NIBP, SpO2
Optional:
◇ RESP,2-TEMP,2-IBP,ETCO2,Network,Thermal Recorder

Availability:

Quantity:



Inquire Add to Basket

Model:
MY-W003

patient monitor mindray patient monitor patient monitor vet

Product Description

A patient monitor is a medical device used to monitor and record a patient's physiological parameters, such as heart rate, blood pressure, breathing, etc. To help the medical staff real-time monitoring the patient's health status, and timely take the necessary treatment measures.

Product Advantage:

Real-time monitoring;
Provide alerts;
Continuous monitoring;
Portability;
Data recording.

Product Uses:

It is commonly used in hospital emergency rooms, operating rooms, intensive care units and other places

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand

Technical Parameters

Standard Configuration SpO2, PR/HR, NIBP, ECG, RESP, 2-TEMP Optional Configuration ETCO2, 2-IBP, Nellcor SpO2, Thermal Printer, Touch Screen

12.1 inch high-resolution color TFT LCD screen
Thinner and lighter design, convenient and portable for user
Freeze instant waveform for real time S-T segment analysis, pace-maker detection.
Full touch screen selectable, more convenient for operation
Real time S-T segment analysis, pace-maker detection
3-level audio/visual alarming
Efficientresistance to interferenceof defibrillator and HF knife.
Lasting working capacity with built-in

main unit (1 PC)
Temperature probe (1 PC)
Disposable ECG Electrodes (5pcs)
Reusable Spo2 sensor (1 PC)
ECG Cable and Leadwire (1 PC)
NIBP cuff and tube (1 PC)
Rechargable lithium battery (1 PC)

FAQ

1. Who Are We?

We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.

2. How Can We Guarantee Quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment.

3.What Can You Buy From Us?

CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.

4. Why Should You Buy From Us Not From Other Suppliers?

1.13 years medical equipment leading exporter

2.One-stop service

3.High quality assurance system

4.Best Professional after-sell service with branch in Nigeria and Madagascar

5.Factory price

5. What Services Can We Provide?