You are here: Home » Product Category » Operation Room Equipment » Syringe Pump » MAYAMED MY-G082A CE Certificate Portable Human Infusion Pump Smart Medical Electric Elastomeric Infusion Syringe Pump for ICU

MAYAMED MY-G082-1 Hospital medical syringe pump Portable Volumetric Infusion Pump Electric Syringe Infusion Pump

Share to:

MAYAMED MY-G082A CE Certificate Portable Human Infusion Pump Smart Medical Electric Elastomeric Infusion Syringe Pump for ICU

Infusion mode Time mode, Rate mode，Weight mode，Drug Library，Intermittent mode of administration
Applicable syringes Various brands of sterile syringes: 5ml,10ml,20ml,30ml,50ml/60ml
Accuracy ±2% (after syringe correct calibration)
Infusion rate 5ml syringe: 0.1 -150ml/h
10ml syringe: 0.1 -300ml/h
20ml syringe: 0.1 -600ml/h
30ml syringe: 0.1 -900ml/h
50ml syringe: 0.1 -1500ml/h
Volume to be
infused (VTBI) 0～1000 ml
Volume Infused (∑) 0～9999.9 ml
KVO rate 0.1-2 ml/h adjustable; default value: 0.1ml/h
Bolus rate
5ml syringe: 100-150ml/h
10ml syringe: 100-300ml/h
20ml syringe: 100-600ml/h
30ml syringe: 100-900ml/h
50ml syringe: 100 -1500ml/h
Alarms
Infusion completion, Empty, Occlusion, Near completion, Low battery, Syringe disengaged, No AC power supply, Battery exhausted, Malfunction etc.
Power supply AC: 100~240V, 50/60Hz
DC: 12V ±1.2V
Power consumption 25VA
Nurse call alarm Optional
Classification Class I, type CF
Dimensions 300(L)x 130(H)x 125 (W)mm, not including pole clamp
Net weight 1.8KG
Waterproof Level IPX3
Occlusion pressure (40.0-160.0)kpa
3 adjustable occlusion pressure settings: low, middle and high
Battery Li_Polymer 7.4V 1900mAh；
Rechargeable Li polymer battery,7.4V, 1900mAh
Can operate more than 6 hours after fully charged at 5ml/h., temperature 25℃.
Battery recharge time: 10h with power on, 3h with power off
Operating conditions Temperature: 5℃~40℃,
Relative humidity: 10~95%,
Atmosphere pressure: 86～106kPa
Transport conditions
Temperature: -20℃~+60℃,
Relative humidity: 10~95%,
Atmosphere pressure: 50～106kPa
Storage conditions
Temperature: -20℃~+45℃,
Relative humidity: 10~95%,
Atmosphere pressure: 50～106kPa

Availability:

Quantity:



Inquire Add to Basket

Model:
MY-G082A

high precision syringe pump syringe pump bayond syringe pump industrial

Product Description

Technical Parameters

FAQ

Medical infusion pumps are devices used to deliver fluids, medications, and nutrients to patients in a controlled and precise manner. They are essential in various healthcare settings, including hospitals, outpatient clinics, and home care.

Product Advantage：

Precision and Accuracy: Infusion pumps allow for precise control over the dosage and rate of infusion, reducing the risk of medication errors.
Safety Features: Many modern pumps include alarms, programmable settings, and safeguards to prevent over-infusion or under-infusion.
Improved Patient Comfort: Patients can receive medications or nutrients without the need for constant supervision, allowing for greater mobility and comfort.
Data Management: Some infusion pumps offer data logging and integration with electronic health records, enhancing monitoring and documentation.

Product Uses：

Medication Administration: Infusion pumps are commonly used to administer intravenous (IV) medications, including analgesics, antibiotics, and chemotherapy agents.
Nutritional Support: They deliver total parenteral nutrition (TPN) to patients who cannot receive adequate nutrition through oral intake.
Fluid Management: Infusion pumps help manage fluid balance in patients, especially those requiring precise hydration or electrolyte replacement.
Continuous Infusion: They provide continuous delivery of medications, ensuring stable plasma drug concentrations.

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand

Infusion mode Time mode, Rate mode，Weight mode，Drug Library，Intermittent mode of administration

Applicable syringes Various brands of sterile syringes: 5ml,10ml,20ml,30ml,50ml/60ml

Accuracy ±2% (after syringe correct calibration)

Infusion rate 5ml syringe: 0.1 -150ml/h

10ml syringe: 0.1 -300ml/h

20ml syringe: 0.1 -600ml/h

30ml syringe: 0.1 -900ml/h

50ml syringe: 0.1 -1500ml/h

Volume to be

infused (VTBI) 0～1000 ml

Volume Infused (∑) 0～9999.9 ml

KVO rate 0.1-2 ml/h adjustable; default value: 0.1ml/h

Bolus rate

5ml syringe: 100-150ml/h

10ml syringe: 100-300ml/h

20ml syringe: 100-600ml/h

30ml syringe: 100-900ml/h

50ml syringe: 100 -1500ml/h

Alarms

Infusion completion, Empty, Occlusion, Near completion, Low battery, Syringe disengaged, No AC power supply, Battery exhausted, Malfunction etc.

Power supply AC: 100~240V, 50/60Hz

DC: 12V ±1.2V

Power consumption 25VA

Nurse call alarm Optional

Classification Class I, type CF

Dimensions 300(L)x 130(H)x 125 (W)mm, not including pole clamp

Net weight 1.8KG

Waterproof Level IPX3

Occlusion pressure (40.0-160.0)kpa

3 adjustable occlusion pressure settings: low, middle and high

Battery Li_Polymer 7.4V 1900mAh；

Rechargeable Li polymer battery,7.4V, 1900mAh

Can operate more than 6 hours after fully charged at 5ml/h., temperature 25℃.

Battery recharge time: 10h with power on, 3h with power off

Operating conditions Temperature: 5℃~40℃,

Relative humidity: 10~95%,

Atmosphere pressure: 86～106kPa

Transport conditions

Temperature: -20℃~+60℃,

Relative humidity: 10~95%,

Atmosphere pressure: 50～106kPa

Storage conditions

Temperature: -20℃~+45℃,

Relative humidity: 10~95%,

Atmosphere pressure: 50～106kPa

1. Who Are We?

We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.

2. How Can We Guarantee Quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment.

3.What Can You Buy From Us?

CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.

4. Why Should You Buy From Us Not From Other Suppliers?

1.13 years medical equipment leading exporter

2.One-stop service

3.High quality assurance system

4.Best Professional after-sell service with branch in Nigeria and Madagascar

5.Factory price

5. What Services Can We Provide?

Accepted Delivery Terms: FOB,CFR,CIF, EXW,FAS,CIP,FCA,DEQ;

Accepted Payment Currency: USD, EUR,CAD, AUD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card,PayPal, Western Union, Cash,Escrow;

Language Spoken:English, Chinese,Spanish, Japanese, Portuguese, German, Arabic, French,Korean

Product Description

Technical Parameters

FAQ

MAYAMED MY-G082A CE Certificate Portable Human Infusion Pump Smart Medical Electric Elastomeric Infusion Syringe Pump for ICU

Product Category

Related Products

Related Blogs

Product Category

Product Category

Maya

Solutions