 |
loading
| Availability: | |
|---|---|
| Quantity: | |
MY-G078A-B
Medical infusion pumps are devices used to deliver fluids, medications, and nutrients to patients in a controlled and precise manner. They are essential in various healthcare settings, including hospitals, outpatient clinics, and home care.
Product Advantage：
Precision and Accuracy: Infusion pumps allow for precise control over the dosage and rate of infusion, reducing the risk of medication errors.
Safety Features: Many modern pumps include alarms, programmable settings, and safeguards to prevent over-infusion or under-infusion.
Improved Patient Comfort: Patients can receive medications or nutrients without the need for constant supervision, allowing for greater mobility and comfort.
Data Management: Some infusion pumps offer data logging and integration with electronic health records, enhancing monitoring and documentation.
Product Uses：
Medication Administration: Infusion pumps are commonly used to administer intravenous (IV) medications, including analgesics, antibiotics, and chemotherapy agents.
Nutritional Support: They deliver total parenteral nutrition (TPN) to patients who cannot receive adequate nutrition through oral intake.
Fluid Management: Infusion pumps help manage fluid balance in patients, especially those requiring precise hydration or electrolyte replacement.
Continuous Infusion: They provide continuous delivery of medications, ensuring stable plasma drug concentrations.
Product Operate Guide：
The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.
Auxiliary personnel
Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand
Features:
4.3 inch color touch screen for clear vision
Simple rate mode with one key start , easy to operate
Compatible with various brands of syringe
Various infusion modes to meet different clinical requirements
User friendly interface with audible and visual alarm system
Rechargeable lithium battery can work continuously for around 5 hours
*Performing cervical self-examination at home/clinic.
*Discover earlier,healthy more.
*Monitor treatment and prevent recurrence,
*The privacy is under your control.
*Portability as a camera.
Standard equipment does not include dolly and computer
Image Sensor 1/4” professional CCD Image Sensor
Pixel 830,000
Mode Green, Black/White
Imaging Mode Color
Image Freezing Control Finger Control; Footswitch Control , Software control
Minimum Illumination 0.05Lux
Signal-to-Noise (SNR) >50dB
Electronic shutter 1-1/10,000 Sec
Light Source Multi-point surrounded high-brightness white cold light source
Back-lighted Compensation automatic
Focus Area 150mm-350mm
Focusing Auto/Manual
Zoom Optical Varifocal Optical Varifocal :22 times
Digital Varifocal Digital Varifocal: 10 times
Dynamic Timing Control Real-time display of acetic acid and iodine reaction tests
Video-Out PAL/NTSC 1.0VP-P,75Ω
Technical Parameter
1) Camera Sony Exview HAD Camera, Supporting RS232 illumination
2) Lens resolution:1/4 "Super HAD color CCD,1300,000pixels，Monitor 21.5 inch
3) Lens horizon resolution :480 lines or more
4) Camera Video Output Interface :S-video, Video, PAL format
5) Camera signal to noise ratio: 52 db
6) Lens focusing distance: standard 200 ~ 500mm, support 150 ~ 550mm
7) 18 times optical zoom lens, digital zoom 12 times
8) Magnification: 216 times
9) Field of view: Φ = 2.5 ~ 320mm
10) Camera self-balancing: internal AWB metering mode
11) Light source types of lens: multi-point circular LED group
12) Lens focus mode: fast automatic or manual focusing
13) 360 degree angle observation imported control handle
Lens resolution: 1/4"super HAD color CCD，480 thousand pixel;
. Lens axial resolution: 470 lines; . Lens S/N: 50dB;
. Lens focus distance: standard 100~400mm; support: 10~1000mm;
. Lens zoom: 1~128 . Lens image output interface: Video, S-video, PAL;
. Lens fouse: AF/MF;
. Lens white balance: AWB;
. Lens lighter type: LED;
. Lens video-output: PAL, VBS-standard 1.0Vp-p;
. AE control: auto/manual/brightness/EV compensation/backlighting compensation;
. Image/digital effect: Multi image processing effects;
. Image printing: support normal copypaper, inkjet copypaper and true color photo-paper;
. Image storage: more than 1 million;
. Power voltage: AC220V ±10%
. Rated power: 500W;
. Working temperature: -10℃ ~50℃
. Storage temperature: -20℃ ~60℃
. Working humidity: 30~80%RH
Colposcopy + laptop
Technical Parameter
1) Camera Sony Exview HAD Camera, Supporting RS232 illumination
2) Lens resolution:1/4 "Super HAD color CCD,800,000pixels
3) Lens horizon resolution :480 lines or more
4) Camera Video Output Interface :S-video, Video, PAL format
5) Camera signal to noise ratio: 52 db
6) Lens focusing distance: standard 200 ~ 500mm, support 150 ~ 550mm
7) 18 times optical zoom lens, digital zoom 12 times
8) Magnification: 216 times
9) Field of view: Φ = 2.5 ~ 320mm
10) Camera self-balancing: internal AWB metering mode
11) Light source types of lens: multi-point circular LED group
12) Lens focus mode: fast automatic or manual focusing
13) 360 degree angle observation imported control handle
Lens zoom: 1~128 . Lens image output interface: Video, S-video, PAL;
. Lens fouse: AF/MF;
. Lens lighter type: LED;
. Lens video-output: PAL, VBS-standard 1.0Vp-p;
. Lens resolution: 1/4"super HAD color CCD ， 480 thousand pixel;
. Lens axial resolution: 470 lines; . Lens S/N: 50dB;
. Lens focus distance: standard 100~400mm; support: 10~1000mm;
AE control: auto/manual/brightness/EV compensation/backlighting compensation;
. Lens white balance: AWB;
. Working temperature: -10 ℃ ~50 ℃
. Storage temperature: -20 ℃ ~60 ℃
. Working humidity: 30~80%RH
. Rated power: 500W;
. Power voltage: AC220V ± 10%
. Image/digital effect: Multi image processing effects
'Resolution:≥3.72Ip/mm Angle of vision: ≥60º Display Screen: 2.5"(LCD)
Depth of View:3-50mm Power consumption:<2W
Illuminance:≥200LUX
Waterproof:IPX7
Resolution:320*240
Rotating angles of the monitor in front
and rear:0 º~130 º
Rotating angles of the monitor in right
and left:0 º~270 º
Weight:180g
Size (3.5"Full View)
Monitor LCD
Resolution Ratio 640*480（RGB）
Aspect Ratio 4:3
Video Refresh Rate 30FPS
Illumination LED
Resolution Ratio 2.0M Pixels
Field Angle 66°
illuminance ≥800LUX
Type Rechargeable Lithium Battery
Long working time ≥200minutes
Voltage 3.7V
Capacity 3200mAh
Charging times More than 300 times
Charging time Less than 8 Hrs.
Charging port Micro USB
Input 100-250V,50Hz
Output 5V,1000mA
Temperature -10℃~﹢45℃
Humidity ≤93％
AP 500hPa to 1060hPa
Temperature 5℃~﹢40℃
Humidity 30％~85％
AP 700hPa to 1060hpa
size 3’’
Resolution 960*480
Power 12V
Resolution 1,200,000 pixel
Power 12V
Light source LED 2000LUX
Blade MAC 2,MAC3,MAC4
Type Rechargeable lithium battery
Charging times > 500 times
Charging time <5 hours
Operating time Lasting 120mins
Specifications
·Material:Both Blade and blade joint are made of Medical 304 stainless steel，The handle is made of H62 copper and Aluminum barrel.
·Characteristic: The fiber optic tube can take off,High quality stainless steel(surface treatment by matte)，to prevent the light reflection, can be used for more than 4000 times 134 ℃ high pressure disinfection。.(high temperature and high pressure disinfection) strong fiber optic cable, not less than 5500 aurora m meters wiring harness, fiber optic catheter diameter is 4MM, fiber optic transmission measurement length is 35 mm. simple Installation: the Joint connection type,can fast and easy to replace the blades
·Size: MAC2 100mm MAC3 130mm MAC4 155±5mm
·Handle diameter---28.5 mm（Adult）
·Light source: halogen bulb (Cold light)
·Bulb Power:2.5V 600MA
·Package:Hard plastic case，Adult set including the fiber optic blade MAC2,MAC3,MAC4，one adult handle，one spare bulb.
·Weight:0.7kg/set（Adult）
·Case size:22.5cm*16.8cm*2.5cm
Main parameters:
Length: 2000mm,
Width: 600mm,
The lowest table: 500mm,
The highest table: 850mm
Table size: 1950 mm × 600 mm (back, seat, leg plate set level)
Table lifting range: Minimum ≤700mm highest ≥950mm
The backplane off angle: ≥ 70 °
By folding back angle: ≥ 10 °
Block the flap angle: ≥ 18 °
Fold under the seat plate angle: ≥ 10 °
Power supply voltage: 240V ± 22V
Frequency: 50Hz ± 1Hz
Input power: 300VA
Machine Weight: 140kg
The hydraulic pump is lifted, the oil pump and the bottom cover are made of stainless steel, and the bed surface is wide
1. Product introduction
This product is used for parturient delivery and gynecological surgery. The bed adopts hydraulic lifting, various actions can be adjusted and locked arbitrarily within the specified range, easy to operate, and the leg plate is detachable. Beautiful appearance and easy to clean.
MY-I011 uses stainless steel
2. Main technical parameters:
Length: 2000mm
Width: 600mm
Height: 620mm
Lifting stroke: ≥240mm
Folding on the back panel: ≥70°
Fold down the back panel: ≥10°
Forward tilt: ≥10°
Backward: ≥22°
3. Configuration list:
Name Quantity Remarks
Master bed 1
Mattress 1
Anesthesia screen 1
Shoulder 2 with pad
Handle 2 with sheath
Armrest 2 with pad
Leg support 2 with pad
Foot kick 1 pair with pad
Size of the table top 2000 mm×480 mm
Lifting range ： Min≤550mm Max≥800mm
Tabletop lean forward： ≥ 20°
Tabletop lean backward： ≥ 25°
Tabletop lean left and right： ≥ 20°
Backboard folding up： ≥ 45°
Backboard folding down： ≥ 20°
Headboard folding up： ≥ 30°
Headboard folding down： ≥ 90°
Legboard folding down： ≥ 90°
Legboard open： ≥ 90°
Waist board rising： ≥ 80mm
Supply voltage： 220V±22V
Frequency： 50Hz±1Hz
Input power： 600VA
Weight： 180kg
Working mode: Short-term load continuous operation
Equipment category： Non AP / APG equipment
Enclosure rating： IPX4
Equipment safety classification: I type B
Fuse models and specifications： T3AL250V（Φ5×20mm）
1. Who Are We?
We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.
2. How Can We Guarantee Quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment.
3.What Can You Buy From Us?
CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.
4. Why Should You Buy From Us Not From Other Suppliers?
1.13 years medical equipment leading exporter
2.One-stop service
3.High quality assurance system
4.Best Professional after-sell service with branch in Nigeria and Madagascar
5.Factory price
5. What Services Can We Provide?
Accepted Delivery Terms: FOB,CFR,CIF, EXW,FAS,CIP,FCA,DEQ;
Accepted Payment Currency: USD, EUR,CAD, AUD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card,PayPal, Western Union, Cash,Escrow;
Language Spoken:English, Chinese,Spanish, Japanese, Portuguese, German, Arabic, French,Korean
