 |
loading
| Availability: | |
|---|---|
| Quantity: | |
G027E
A patient monitor is a medical device used to monitor and record a patient's physiological parameters, such as heart rate, blood pressure, breathing, etc. To help the medical staff real-time monitoring the patient's health status, and timely take the necessary treatment measures.
Product Advantage:
Real-time monitoring;
Provide alerts;
Continuous monitoring;
Portability;
Data recording.
Product Uses:
It is commonly used in hospital emergency rooms, operating rooms, intensive care units and other places
Product Operate Guide：
The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.
Auxiliary personnel
Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand
DISPLAY METHOD
LED display
MEASUREMENT METHOD
Oscillographic method
PERATION TEMPERATURE
+5℃~+40C
WORKING HUMIDITY
15%RH~80%RH(No condensation)
PULSE MEASUREMENT RANGE
40-199 times/minute
BLOOD PRESSURE MEASUREMENT RANGE
0mmHg~260mmHg(0kPa~34.7kPa)
BLOOD PRESSURE MEASUREMENT
±3mmHg(±0.4kPa)
ERROR
ATMOSPHERIC PRESSURE
80kPa~105kPa
TRANSPORTATION AND STORAGE HUMIDITY
-20°C~+55°C.15%RH~93%RH
( non-condensing ),80kPa~105khPa
APPLICABLE ARM CIRCUMFERENCE
22cm~32cm
PULSE MEASUREMENT ERROR
≤reading ±5%
BATTERY
High energy and long-term battery
RESOLUTION RATIO
1mmHg/0.1kPa
DATE OF MANUFACTURE
April 19,2024
PRODUCTION
BATCH NUMBER
20240419
SCOPE OF APPLICATION
For measuring human blood pressure and pulse (adults over 12 years old, not suitable for newborns)
Feature:
1. 12.1 inch, 800x600 dpi, color TFT display;
2. Separated Alarm and beep sound seting;
3. Separated module:Main board+Parameter module(ECG, NIBP, Sp02);
4. Display brightness adjustable;
5. Real time S-T segment analysis, and ARR analysis;
6. Spo2 Pitch Tone Variation and Drug Dose Calculation;
7. Parameter waveform and characters color selectable
8. Multi-display: Standard, Large font, Trend Coexis, OxyCRG dynamic
9. Standby mode for power saving and suspend monitoring;
10. 7-lead ECG waveforms display in phase)
11. Capture dynamic waveforms and history waveforms review;
12. VGA output
13. Built-in rechargeable lithium battery 4 hours, and battery volume checking.
14. Efficient resistance to interference of defibrillator and HF knife:
15. SD card memory and USB data output;
16. TCP/IP networking platform enable abundant future upgrade& CMS
17. Complete and flexible mounting solution for transportation and
in-patient monitoring
Standard Configuration SpO2, PR/HR, NIBP, ECG, RESP, 2-TEMP Optional Configuration ETCO2, 2-IBP, Nellcor SpO2, Thermal Printer, Touch Screen
12.1 inch high-resolution color TFT LCD screen
Thinner and lighter design, convenient and portable for user
Freeze instant waveform for real time S-T segment analysis, pace-maker detection.
Full touch screen selectable, more convenient for operation
Real time S-T segment analysis, pace-maker detection
3-level audio/visual alarming
Efficientresistance to interferenceof defibrillator and HF knife.
Lasting working capacity with built-in
main unit (1 PC)
Temperature probe (1 PC)
Disposable ECG Electrodes (5pcs)
Reusable Spo2 sensor (1 PC)
ECG Cable and Leadwire (1 PC)
NIBP cuff and tube (1 PC)
Rechargable lithium battery (1 PC)
1. Who Are We?
We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.
2. How Can We Guarantee Quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment.
3.What Can You Buy From Us?
CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.
4. Why Should You Buy From Us Not From Other Suppliers?
1.13 years medical equipment leading exporter
2.One-stop service
3.High quality assurance system
4.Best Professional after-sell service with branch in Nigeria and Madagascar
5.Factory price
5. What Services Can We Provide?
Accepted Delivery Terms: FOB,CFR,CIF, EXW,FAS,CIP,FCA,DEQ;
Accepted Payment Currency: USD, EUR,CAD, AUD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card,PayPal, Western Union, Cash,Escrow;
Language Spoken:English, Chinese,Spanish, Japanese, Portuguese, German, Arabic, French,Korean
