 |
loading
| Availability: | |
|---|---|
| Quantity: | |
MY-G054
A medical laryngoscope is a device used primarily for examining the larynx (voice box) and facilitating procedures related to the airway, such as intubation. Laryngoscopes are commonly used in hospitals, emergency rooms, and during surgeries to ensure clear visualization of the vocal cords and surrounding structures, enabling effective airway management and diagnosis of laryngeal conditions.
Product Advantage：
Enhanced Visualization: With the use of a laryngoscope, healthcare professionals can gain a clear and direct view of the larynx, which is essential for diagnosing and treating airway-related conditions accurately.
Facilitates Safe Intubation: The laryngoscope is critical in ensuring the correct placement of endotracheal tubes, reducing the risk of complications during anesthesia or emergency intubation.
Multiple Designs for Various Needs: Laryngoscopes come in different types, such as rigid or flexible, depending on the procedure. This versatility makes them useful for a wide range of clinical situations, from routine exams to complex surgeries.
Improved Patient Safety: By allowing better control and visualization during airway management, laryngoscopes help reduce the risk of injury or complications, especially in critical care settings.
Product Uses：
Airway Examination: The laryngoscope allows healthcare providers to visualize the larynx and vocal cords, which is crucial in diagnosing conditions such as vocal cord paralysis, tumors, or inflammation.
Intubation Aid: One of the primary uses of a laryngoscope is to help guide the insertion of a breathing tube into the trachea during intubation, a procedure often performed during anesthesia or in emergency settings.
Surgical Assistance: It provides visualization during certain throat surgeries or procedures such as biopsies of the larynx or removing foreign bodies from the airway.
Teaching Tool: Laryngoscopes are also used in medical training to teach students and professionals how to properly manage the airway during emergency situations and surgeries.
Product Operate Guide：
The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.
Auxiliary personnel
Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand
Specifications
·Material:Both Blade and blade joint are made of Medical 304 stainless steel，The handle is made of H62 copper and Aluminum barrel.
·Characteristic: The fiber optic tube can take off,High quality stainless steel(surface treatment by matte)，to prevent the light reflection, can be used for more than 4000 times 134 ℃ high pressure disinfection。.(high temperature and high pressure disinfection) strong fiber optic cable, not less than 5500 aurora m meters wiring harness, fiber optic catheter diameter is 4MM, fiber optic transmission measurement length is 35 mm. simple Installation: the Joint connection type,can fast and easy to replace the blades
·Size: MAC2 100mm MAC3 130mm MAC4 155±5mm
·Handle diameter---28.5 mm（Adult）
·Light source: halogen bulb (Cold light)
·Bulb Power:2.5V 600MA
·Package:Hard plastic case，Adult set including the fiber optic blade MAC2,MAC3,MAC4，one adult handle，one spare bulb.
·Weight:0.7kg/set（Adult）
·Case size:22.5cm*16.8cm*2.5cm
Main parameters:
Length: 2000mm,
Width: 600mm,
The lowest table: 500mm,
The highest table: 850mm
Table size: 1950 mm × 600 mm (back, seat, leg plate set level)
Table lifting range: Minimum ≤700mm highest ≥950mm
The backplane off angle: ≥ 70 °
By folding back angle: ≥ 10 °
Block the flap angle: ≥ 18 °
Fold under the seat plate angle: ≥ 10 °
Power supply voltage: 240V ± 22V
Frequency: 50Hz ± 1Hz
Input power: 300VA
Machine Weight: 140kg
The hydraulic pump is lifted, the oil pump and the bottom cover are made of stainless steel, and the bed surface is wide
1. Product introduction
This product is used for parturient delivery and gynecological surgery. The bed adopts hydraulic lifting, various actions can be adjusted and locked arbitrarily within the specified range, easy to operate, and the leg plate is detachable. Beautiful appearance and easy to clean.
MY-I011 uses stainless steel
2. Main technical parameters:
Length: 2000mm
Width: 600mm
Height: 620mm
Lifting stroke: ≥240mm
Folding on the back panel: ≥70°
Fold down the back panel: ≥10°
Forward tilt: ≥10°
Backward: ≥22°
3. Configuration list:
Name Quantity Remarks
Master bed 1
Mattress 1
Anesthesia screen 1
Shoulder 2 with pad
Handle 2 with sheath
Armrest 2 with pad
Leg support 2 with pad
Foot kick 1 pair with pad
Size of the table top 2000 mm×480 mm
Lifting range ： Min≤550mm Max≥800mm
Tabletop lean forward： ≥ 20°
Tabletop lean backward： ≥ 25°
Tabletop lean left and right： ≥ 20°
Backboard folding up： ≥ 45°
Backboard folding down： ≥ 20°
Headboard folding up： ≥ 30°
Headboard folding down： ≥ 90°
Legboard folding down： ≥ 90°
Legboard open： ≥ 90°
Waist board rising： ≥ 80mm
Supply voltage： 220V±22V
Frequency： 50Hz±1Hz
Input power： 600VA
Weight： 180kg
Working mode: Short-term load continuous operation
Equipment category： Non AP / APG equipment
Enclosure rating： IPX4
Equipment safety classification: I type B
Fuse models and specifications： T3AL250V（Φ5×20mm）
1. Who Are We?
We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.
2. How Can We Guarantee Quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment.
3.What Can You Buy From Us?
CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.
4. Why Should You Buy From Us Not From Other Suppliers?
1.13 years medical equipment leading exporter
2.One-stop service
3.High quality assurance system
4.Best Professional after-sell service with branch in Nigeria and Madagascar
5.Factory price
5. What Services Can We Provide?
Accepted Delivery Terms: FOB,CFR,CIF, EXW,FAS,CIP,FCA,DEQ;
Accepted Payment Currency: USD, EUR,CAD, AUD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card,PayPal, Western Union, Cash,Escrow;
Language Spoken:English, Chinese,Spanish, Japanese, Portuguese, German, Arabic, French,Korean
